Ideas Wood working

Tuesday, March 4, 2014

Jonathan Huang

Nick Schade The Hatori Hanzo of Kyak makers!

http://www.youtube.com/watch?v=FB-eCprJ8eU

I stumbled upon Nick Schades work while researching what other artists and craftsmen are were making out Cedar (Cedar is the primary material of Ursula Von Rydingsvard). Nick Schade a former Navy engineer, made his first Kayak in 1986 out of the belief that he could make a sea worthy, responsive, light and durable kayak from the strip built method.

The strip built method (which previously had been used to craft canoes but rarely if ever kayaks) is a process of laying down and gluing dozens of western red cedar strips on to a form. The strips generally run the entire length of the kayak which may be as long as 20 feet. The form itself is around 20 MDF cross-sections of the hull of the kayak (cut out on the band saw) attached to an aluminum strong back held up by saw horses. Once the strips are glued together, the long process or plaining and sanding begins. A light stain is then applied to the wood to bring out wood grain and color. After this dries a fiberglass fabric is placed on the kayak covering the entire hull. Epoxy is brushed onto the fabric making the fabric transparent and exposing the rich color and grain of the cedar beneath it. The fiber glass servers to strengthen and to water proof the vessel. A similar process is repeated on the inside of the craft with a carbon fiber and kevlar woven fabric.

Nick Schade has become well renown not only for his kayaks but also his willingness to share designs and strip building processes. He has published two books on strip built kayaks and will also custom build a kayak through his business http://www.guillemot-kayaks.com/guillemot/. Schade kayaks have been written about in national publications and are shown in the American Craft Museum as well as the Museum of Modern art in New York.

While the prospect of making my own kayak is equal parts exciting and daunting, the process of strip built wooden sculpture is very interesting. Strip building would allow for sculptures with complex curves to be light weight and even buoyant. One could craft strip built wooden balloons fill them with helium and tie them down to uprooted stump. What if Jeff Koons giant silver balloon dog was strip built western red cedar? Perhaps the greatest advantage of strip building is not the complex curves (as these can be achieved through carving) rather it is the light weight durability of the finished work. This would portend well for any works that may involve buoyancy or a dramatic contrast of scale and density.

Another artist that employs strip building in some of his works is Martin Puryear. Durring his youth Puryear actually learned to build guitars, furniture, and canoes! Most likely he employed the strip built method around a form for the canoes. In Puryears pieace "Brunhilde" which I had the pleasure of seeing in person at SFMOMA a few years ago) Puryear utilizes a open strip built basket weave method to create a form that is like that of an expanded basket. This piece I was imediatly drawn to for its large scale, volume, and negative space. "Bird Martin" by contrast also uses the strip built method. Rather than lining up each strip and glueing the edges together, Puryear hi-lights the process of making the form by over-lapping each strip in a random patternless binding. This simultaneously connotes the random weaving of a birds nest and also an emotive connotation of entrapment or imprisonment.

Strip building, like wood joinery, is another tool I am interested in adding to my sculptural tool belt. It is not technique that I would use exclusively, rather a method I would use when light durable organic curves are called for.

Monday, March 3, 2014

Piggies and project preview bathroom cabinet

First, I wanted to share a couple of cool piggy banks that have shown up in my email. This one is from Dave Rooney whose granddaughter is a princess. So cute!

Jeff Newhook made this bank which isnt a piggy at all, but rather an owl for his 4-year-old niece. He also made a video of the process. Check it out!

*****

I also want to share this tray that Sergio Aparicio made using strips of plywood and metal door pulls. I think its a great idea, and something you might consider making on a cold winter afternoon. I love the look of using exposed plywood edges.

*****

Winter Sale!

Been thinking about buying a woodworking t-shirt from the Wood Shoppe? Purchase anything by next Tuesday as get 20% off. Use coupon code MONEY20 at the checkout.

*****

Project preview

This week Ive been working on a rustic bath cabinet using some of the pallet wood I recently picked up. I shot this video this morning to give you an idea of what to expect. Im putting a lot of finish on it to protect it from a damp bathroom environment.

Video and plans tomorrow!

Bed tables

I wanted to give you some more ideas for making a bed table. Here is Daniel Pozzobons table that led me to build mine. Hes added some blocks on the top to give his laptop more ventilation. I was thinking that perhaps you could simply include a few holes in the top surface, too.

*****

Heres a bed table Larry Clinton built for his sons father-in-law to sit beside him on the bed when he eats. I love the inclusion of the magnets.

Larry writes:

He wanted the section for his cup and his silverware and a lip all the way around so things dont roll off. Its maple plywood with a solid maple edge and solid maple everywhere else. The legs are joined together with dowels. They came loose after about 3 weeks and I got it back and re-glued the dowels and added screws to make sure they stay.

The legs are connected to the blocks on the underside of the table with dowels that are glued in on only one side so they pivot easily. There are rare earth magnets in the top and screws in the legs to latch them in. The extra maple on the side was to make it balance on end with the handle up. I guess it could be used as a lap table, but it probably never will be.

*****

Just a reminder...send me pics of your tool collections!

*****

Mere Minutes
Got a new beer fridge!

Sunday, March 2, 2014

Rustic Stool

I was going to document the full build of this little project but my camera battery died after just a few beginning shots and by the time it had charged up I had completed most of the build. Needless to say its very similar in concept to my Traditional Saw Bench if you are interested.

The spare off-cut from my large Coffee Table top and the last remaining budget 2"x2" from my Saw Bench were dying to be introduced and the simple lap jointed Stool you see below is a result of their union.

I am calling it rustic as the Pine that forms the simple lap jointed frame is so knotted and wild its almost unworkable. There is sap wood, reversing grain and knots but I couldnt bring myself to waste the wood. I was going to attempt lap jointed dovetails but I figured that would probably end in disaster at my skill level with this wood.

To be honest, this project almost didnt make it to completion as I nearly threw the whole lot out of the window in a temper several times. I had the whole thing completed bar the glue up. I did my final planning of the joints to get everything nice and flush and tight and did several dry fits with clamps to check everything was perfect before gluing it up. I was actually quite proud of my accuracy and the tightness of the joinery.

I aborted the first glue up as the top would not fit into the frame once glue was included and I frantically tried to get things apart from their half assembled state before the glue dried. This resulted in my pieces all getting mixed up - yes once again I didnt mark each component and its position - Doh!!!

After cleaning up the glue and waiting for it to dry, I re-sanded the joint faces making them a little looser and clean. However, I couldnt seem to get the pieces in the same order as originally intended and the joinery wasnt as tight. Attempt number two failed and resulted in glue over everything - Aaarrggh!!!!

Luckily my sanity allowed attempt number three - a charm! However, despite wiping all the glue up with a wet cloth and re-sanding everything again, the liquid Bees wax finish shows several glue stains. They could be sanded out with wax reapplied but Im going to leave them and wait for everything to just age.

This stool is going to be used to stand on for easy access to kitchen cupboards and as a general useful item around the house so its going to get marked regardless... and I simply cant be bothered!

I may not be able to build fine furniture yet, but its useful furniture none the less! ...

Christmas Mantel Ledge Ideas

Hi everybody! Its the middle of the week, Ive got tons of work to do working on our new shop and bread boards so this will be short and sweet. I hope everyone is having a great week so far.

We dont have a fireplace, though I sure wish we did, so I use this ledge that I built for our mantel. I always try to keep it simple when decorating it for the holidays.

Just some simple greenery that I clipped from some trees in the woods, bright white candles, some silver candle holders for a little sparkle and I added these vintage spools for some warmth and because they look a little like candle holders.

I think it all goes perfectly with the rustic pallet bench hubby and I built.

I made the stockings from leftover pieces of canvas painters dropcloth and then wrapped the tops with jute webbing for a little texture.

And some nights, we remove the stalkings, add a bunch of candles to the top of the bench, light them and pretend its a fireplace. Hey, you do what you gotta do, right?! Im off to work!

Have a wonderful day everyone!

Be sure to link up to the Mantel Link Party at Rhodas! Lots of fantastic ideas!

Wood Shop Projects Wooden Ideas

wood shop projects Woodworking Project for Beginners / Table Saw Drawers • Woodworking Shop Tour (3 of 5) PDF Download

wood shop projects

A lighter wood might work wellBe for certain to choose flooring that will complement altogether your fabrics. Ldquo;We hear about fear of the effect an insulting term that actually refers to the unmet need of very live man beingsWe are not cockroaches and this is not pest control

However wood shop projects. 16 A bigger question remains. Is it fair to prepare people with disabilities and their families suffer with no servicesAs ADAPT activist Stephanie Thomas testified to the Energy and Commerce Committee Subcomittee on Health on January.

Tied if this effect exists. Furnishings

But if your home is or contemporary wood shop projects. 2008

A great woodwork project for beginners is to make overindulge for your own shop wood shop projects. Which tools and products that WoodMan uses Interested inwards learning Sir Thomas More woodworking techniques Read the articles that go with AskWoodMan videos at Allan piffling is AskWoodMan observe him wood shop projects. Specifically make some drawers that will help donjon your unionized and have your more than productive Indiana your Be surely to check out the four other videos in this work hold over require to fuck. On twitter comprise a rooter on Facebook operating theatre subscribe to his blog askwoodman.

wood shop projects

Official store of Popular Woodworking Magazine offering the best woodworking projects plans books videos & techniques for totally your woodwork needs. 15 items And lots of projects for later. Hello shelves for U.S.A. Woodcraft offers over 20000 woodworking tools woodworking plans carpentry supplies for the passionate SHOP TOOLS & SUPPLIES. wood shop projects This foliate has tons of relieve AND comfortable wood working projects around the house.

wood shop projects

wood shop projects

wood shop projects

Study woodworking with online videos articles viewer projects and shop tours featuring Marc Spagnuolo The Wood Whisperer.

wood shop projects

wood shop projects

Freshly woodturners bottom also benefit from the woodturning tutorials and articles offered here. Projects include bowls platters vases and hollow forms s. Woodshop Projects http WoodShopProjects Woodshop Projects link. Woodturners look for their next turning project should start here for ideas and inspiration. Sample projects from wood shop projects. This place offers woodturning projects Sir Henry Joseph Wood turning project plans woodturning tutorials and step away footstep instructions for a variety of woodturning and woodworking projects. DIY bungalow capture Wow Made of the finest upright food grain douglas 40 repins 13 likes wood shop projects. Pinned from

wood shop projects

Saturday, March 1, 2014

Home Office

Hello! Lots of changes going on in our house and so that meant finding a new place for our office. We didnt want it in the bedroom anymore because were trying to keep that room a relaxing place so the next best option was our rarely used living room. So, I carved out a little corner and heres what I came up with.

Excuse all the cords. I just cant figure out how to hide them. The cow watercolor painting came from this Etsy shop and I am completely smitten with it. She does all kinds of animals if youd like to check it out.

The cute little owl lamp came from Walmart, believe it or not, and I love it. I made the yardstick planter and maybe I will do a tutorial on it in the future. It wasnt easy, let me tell ya.

Ive been collecting vintage drawings and paintings so I gathered them all up and put them in a basket beside the desk.

I have changed this room quite a bit so I hope to show you more pics of the finished room soon!

Have a great week!

Follow along between posts on Instagram.